7
Cleanup Instructions
Step 1
Insert detergent suction tube into a clean
container (not supplied) with one gallon
(4 L) of fresh water.
Step 2
Pull back the collar on the spray lance
to insert detergent nozzle (see page 6).
WARNING!
• Never use bleach, chlorine products and
other corrosive chemicals
• Never use liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Never use tri-sodium phosphate products
• Never use ammonia products
• Never use acid-based products
These products can cause physical injuries
to the operator and irreversible damage to
the machine and/or damage the surface
being cleaned.
IMPORTANT:
When you have finished using
detergent, always follow the Cleanup Instructions.
Failure to clean properly will cause the injection
system to become clogged and inoperable.
Step 3
Turn adjustable knob counter-clockwise
to open the detergent suction tube.
Step 4
With the motor running, press and hold
the gun trigger for one minute or until the
container of fresh water is empty.
Step 5
After siphoning the water, turn adjustable
knob clockwise to close off the detergent
suction
tube.
Step 6
Release the gun trigger and attach one
of the high-pressure nozzles.
Working with Detergent
Detergent Overview
To enhance the efficiency of the pressure washer,
sometimes it is necessary to use detergents to
help loosen tough dirt and grime.
CAUTION:
This machine has been designed for
use with pressure washer detergents only. The
use of other detergents or chemicals may affect
the operation of the machine and will void the
warranty.
NOTE:
To apply detergent, the black-coloured
detergent nozzle must be used to activate the
low-pressure detergent injection system.
Detergent Application
Step 1
Place suction hose into a container
of pressure washer detergent.
Step 2
Pull back the collar on the spray lance
to insert detergent nozzle (see page 6).
Step 3
Turn adjustable knob counter-clockwise
to open the detergent suction tube.
Step 4
With the motor running, depress the
gun trigger to apply detergent to the work
area; DO NOT allow detergent to dry
on
surface.
Step 5
After applying detergent, turn adjustable
knob clockwise to close off the detergent
suction
tube.
Step 6
Release the gun trigger and attach one
of the high-pressure nozzles to rinse.
