8
6) Slide the sleeve brace over the pole joint until the push-pins lock the brace into place. NOTE: To
disassemble, push the pin in to slide the brace away from the joint.
7) Join upright poles.
8) Unzip doors to allow air to enter. Raise the tent end and insert the end of the upright pole onto the
post on the bottom of the T-pole. Lift the pole and place pole bottom over the pin attached to the D-
ring at the bottom of the tent.
9) Repeat step 8 on the other side of the tent.
Note: For 9x8 tents only (model 6098)
.
The 9x8 tents are equipped with adjustable upright poles. This is to allow for compact storage.
Lengthen the uprights by loosening the thumbscrews and extending the inner pole. Adjust the upright
poles so the tent is taut
—do not stretch too tight. Tighten thumbscrews finger-tight. To loosen, first
take the weight off of the pole, then turn thumb screw. Avoid pinch points.
WARNING
Hold poles firmly. Avoid pinch points.
