Fig. 1
Fig. 5
Fig. 2
Fig. 3
Fig. 7
Fig. 6
Fig. 4
Fig. 8
MODEL 2000007832
STITCH LINE
TENT SETUP INSTRUCTIONS
Before you begin
t
Read all instructions before set up.
t
Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
t
Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
t
Secure with all stakes and guylines provided to prevent property
damage or personal injury.
t
For best results in windy conditions, position narrow end of tent
into the wind.
t
Do not drop tent.
t
Do not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
t
THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
t
Under no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION:
Avoid pinch points when opening and closing the
tent frame.
(continued on other side)
Extend the Tent Frame
Raise the Tent
t
Stand the tent upright with the hub assembly at the
top. (Fig. 1)
t
Unfold the arms of the tent downward until they lay flat on
the ground. (Fig. 2)
1
2
3
Verify Connections
between Tent and
Frame Poles
t
Verify the clips along the edges of the tent are properly
attached to the frame poles. (Fig. 7 and Fig. 8)
t
Unfold the arm joints located at each of the tent corners.
The tent will raise as the leg poles are extended.
(Fig. 3 and 4)
t
Extend each of the telescoping leg poles until they snap
into place. (Fig. 5 and 6)
Clip
Pole
