Koden KDS-6000BB, Руководство по установке

Страница: 48 / 72

Chapter 1 Installation KDS-6000BB
1-28 0092660002-06
The buzzer is mounted
on the cover side.
CW-413-5M
To J1 connector of Processor
unit (DPU-610)
5 pin connector
Connection of TD position alarm / Ext. Sync. Box (JB-36)
For the TD position alarm / Ext. Sync. Box (JB-36), the equipped buzzer sounds for alarming
when the Transducer unit remains as projected at the time of power OFF of the Processor
unit.
Connection table of TD position alarm / Ext. Sync. Box (JB-36)
* Subject to version change
※
Terminals from 4 to 10 have been connected at shipping from factory.
(1) Connection to the TD position alarm / Ext. Sync. Box (JB-36) and J1 of the Processor unit
(DPU-610).
Fig. 1.32 Connection of KDS-6000BB
– TD position alarm / Ext. Sync. Box
TD position alarm / Ext. Sync.
Box (JB-36)
Cable Processor unit (DPU-610)
Terminal No. and name of signal Color of cable
Name of
cable
Connector
No.
Pin
No.
Name of
signal
J1
(C50-800*)
1 TRIG.IN
Trigger signal
from external
echo sounder
External
echo
sounder
2 GND
－
3 TRIG.OUT
Trigger output
to external
echo sounder
4 GND2 Black
CW-413-5M J1
4 GND2
5 UP ALARM Orange 5 UP ALARM
6 BUZZ- Black
Buzzer
7 BUZZ+ Red
8 TRIG.OUT Red
CW-413-5M J1
3 TRIG.OUT
9 GND
Brown or
White + Brown
2 GND
10 TRIG.IN Blue 1 EXT.TRIG
J1 10 1