Koden KDS-6000BB, Руководство по установке

Страница: 26 / 72

Chapter 1 Installation KDS-6000BB
1-6 0092660002-06
1.4.2 Flush-mount installation of Operation unit
(1) Make a square hole at the location to be installed (See Fig. 1.6)
(2) Remove 4 plastic corner guard caps of the Operation unit (These can be easily pulled out
upwards).
(3) Confirm that the Operation unit matches the mounting hole. If not matches, correct the
mounting hole.
(4) Put the Operation unit and connected cable into the mounting hole, and set it to the
position in which the Operation unit becomes parallel to the install panel. (Fig. 1.5)
(5) Install the Operation unit in the installing location (Mounting hole) and fix it with 4 tapping
screws (4 mm) (M4 or pan-head). (Prepare 4 mm screws suitable for thickness of installing
location.)
(6) Install the corner guard caps removed in step (2).
Mounting hole
Fig. 1.6 Hole for flush-mount installation of Operation unit
Fig. 1.5 Flush-mount installation of Operation unit
Mounting
hole