Koden CVS-126 Скачать руководство пользователя страница 57

Страница: 57 / 73

CVS-126

Chapter 5 Installation

0093132702-08

5-3

Knob bolt

Turn two turns the knob bolt to

loosen it and pull the unit upward.

CVS-126 Display unit

Mounting bracket

Desk-top Installation

Fig. 5.2 Desk-top Installation

(1) Loosen the knob bolt fixing CVS-126 Display

unit to the mounting bracket, push the unit to
the left side and pull the unit upward.

(2) Place the removed unit to a safe and flat

place.

(3) Place the mounting bracket on the location

for the unit to be installed and fix it with four
screws (trans-tapping screws) supplied with
installing materials.

(4) Connect the connectors for power and

transducer to the unit respectively.

(5) Install the unit to the mounting bracket and fix

the unit by turning clockwise the knob bolt

Flush-mount Installation

(1) Make a square hole (160mm x 160mm) at the location to be installed. (See Fig. 5.4.)

(2) Turn counter-clockwise the knob bolt fixing CVS-126 Display unit to the mounting bracket to

loosen it, push the unit to the left side and pull the unit upward. The mounting bracket and knob
bolt are not used.

(3) Confirm that the unit matches with the square holes. If not matched, correct the square hole.

(4) Remove the front frame of CVS-126 Display unit, pulling it toward you. (See Fig. 5.3.)

(5) Connect the connectors for power and transducer to the unit respectively.

(6) Install the CVS-126 Display unit in the installing location (square hole) and fix it with four tapping

screws (4mm) (M4 or pan-head). (Prepare 4mm screws suitable for thickness of installing
location.)

(7) Install the front frame removed in step (4).

Fixing screw x 4

Содержание CVS-126










































































Результаты поиска

Содержание CVS-126

Отзывы:

Похожие инструкции для CVS-126

Бренды по названию

Популярные бренды

Koden CVS-126, Руководство по эксплуатации

Результаты поиска

Содержание CVS-126

Отзывы:

Похожие инструкции для CVS-126

Бренды по названию

Популярные бренды