Koden CVS-126, Руководство по эксплуатации

Страница: 39 / 73

Chapter 2 How to use the menu CVS-126
2-8 0093132702-08
2.14 Preset/WPT edit/WPT
delete of Waypoint
NAV Start
The NAV can be started by selecting the
destination from the destination list.
To perform the NAV start, the destination must
be preset.
(See [1.9
Use of [EVENT] key]
)
Caution: Requires position data from
GPS sensor.
1
Press the [MENU] key.
2
Select [NAV]

[NAV start]. (See [2.1 How
to operate the menu])
3
Press the [ ] key.
4
Select the [Destination list] preset. (Press
the [ ] key or [ ] key)
Caution: The list No. selected is reversed
in yellow.
5
Press the [ ] key.
6
Select the [Yes] in the confirmation menu.
(Press the [ ] key or [ ] key)
7
Press the [MENU] key.
Then, the NAV starts.
Cancel the NAV
The NAV started can be cancelled halfway.
1 Press the[MENU] key
2 Select [NAV]

[NAV cancel]. (See [2.1
How to operate the menu])
3 Press the [ ] key.
4 Press the [Yes]. (Press the [ ] key or [ ]
key)
NAV cancel
Yes
No
5
Press the [MENU] key. Then, the NAV is
released.
6
To return the display to the original one,
the display mode shall be switched over.
(See: [1.4 Switch-over of Display mode])
Edit the destination
By entering the latitude and longitude, the
destination can be preset.
The list preset in the past can be edit.
1
Press the [MENU] key.
2
Select [NAV]

[WPT edit]. (See [2.1 How
to operate the menu])
3
Press the [ ] key.
4
Select the list No. to be edited from the
[WPT edit] list. (Press the [ ] key or [ ]
key)
5 Press the [ ] key.
6 Select the character with the [ ] key or [ ]
NAV starts
Yes
No
NAV start