Koden CVS-126, Руководство по эксплуатации

Страница: 51 / 73

Chapter 3 How to use the menu2 CVS-126
3-4 0093132702-08
3.5 Maintenance Menu
Simulation
When the [Simulation] is set ON, the pseudo
image of echo sounder is displayed.
Slide show
The slide show of the images stored in [Image]

[Image recall] is available. The time intervals
for image changeover can be selected from 15
seconds and 30 seconds.
Caution: To perform slide show,
registration in the list of image memory
is required. When it is not registered,
slide show cannot be selected.
Initialize
It returns all the settings in the menu to the
factory settings. However, the memorized data of
display remains unchanged.
Caution: It returns to the factory settings
and the power is automatically shut
down.
System Check
It is used for diagnostic test.
(See [4.5 Diagnostic Test])
All WPTs deletes
All WPT lists can be deleted.
All stored image deletes
All stored image lists can be deleted.
Bottom start
Set up the starting depth of the seabed
detection.Once set, the fish echo or the seabed
shallower than set up depth will not be detected.
Inner-hull
When the installation of a transducer is
[Inner-hull], select the [Yes].
Caution: When a setting is altered, the
value of Gain (TD) will be initialized.
Universal display setting ( )
The display can also be set reversed, upside
down or left to right. This setting can be used
when installed on ceiling, etc.
Prev
Correct
In out
Setting
Maintain
Simulation
Initialize
System check
Return
No
OFF
All WPTs:DLT
All IMG DT:DLT
Slideshow
OFF
Bottom start 1.5
123
Inner-hull
No