Kodamo Essence FM MKII, Руководство пользователя

Страница: 5 / 31

TouchPiano....................................................................................................................28
Automation..........................................................................................................................29
Effect List..............................................................................................................................29
Troubleshooting...................................................................................................................30
Making connections
It’s the moment to plug your EssenceFM!
All the back panel connectors are detailed below:
- Audio Output Pairs 1 to 4 (¼ inch / 6,35 mm TRS phone jacks): Each pair can operate as a
stereo bus (cf. FX and Routing section). Each output delivers balanced signal, but still can
be connected to an unbalanced TS jack.
- USB (Type B): Connects to a host system for USB-MIDI transmission.
-
Ethernet (8-pin RJ45): Connects to a network to carry MIDI-RTP packets.
- MIDI Out (5-pin DIN): Connects to any MIDI instrument to be controlled by the
EssenceFM.
-
MIDI Thru (5-pin DIN): Any MIDI data fed into the MIDI In port will be output here
directly.
-
MIDI In (5-pin DIN): Connects to any MIDI controlling device (e.g. master keyboard,
synth, sequencer, computer MIDI interface, wind controller, etc.)
-
DC Power supply: Connects to the supplied 12V DC 2A power unit.
Let’s play !
When powered up, the EssenceFM starts in
Patch mode by default, letting you play with its
presets sounds.
Just scroll down the list and select a patch by
pressing on its name to use it.