Kodamo Essence FM MKII, Руководство пользователя

Страница: 19 / 31

Layer List : Selects the layer you want to work on.
Sequencing Grid : As explained above, this grid is the main space in which you place events to build
your sequence.
Loop : If checked, the sequence will play indefinitely until you release the note.
MIDI Sync : If checked, the Voice Sequencer will lock to an external MIDI clock, instead of internal
tempo. Caution: be sure your sequencer (or any other MIDI controller) is able to send this kind of
message when you’re using this feature, otherwise your Voice Sequence won’t play at all. The line
which appears below shows you if an external clock is received, and, if so, the calculated tempo.
Fixed Tempo [Internal Sync mode only] (1 ~ 500): Sets the internal Voice Sequence tempo
Step division [MIDI Sync mode only] (0.125 ~ 2): Sets the grid division of the sequence when
synced to an external MIDI clock.
Add Event (+) : Adds an event into the selected layer track
Quantize: Puts selected event on the closer beat vertical rule.
Quantize All : Temporally aligns all events on the sequencer grid.
Event kind radio buttons (Note or Swap): Selects the current event type, which was detailed in
Overview section below.
Duration [Note event only] (0 ~ 126 ; Infinite): Sets the event length, and allows to simulate a Note
Off event. If set to infinite, this event won’t be simulated. Note: A real Note Off event, incoming
from MIDI, will always be a priority !
Relative Note [Note event only] (-48 ~ +48): Sets the note event transposition, relatively to the
incoming MIDI note pitch.
Layer Number [Swap event only]: Sets the layer to which the note will be swapped.
Trigger Once : Triggers the event only once if the sequence is looped.
Delete Event (x) : Remove selected event from the grid.
Performance mode
Manage : Goes to Performance Manage
page, described below.
FX & Routing : Goes to Performance
Effects and Routing parameters page,.
Knobs : Goes to Knob assign page
Toggle mute : Mute all unmuted parts,
and vice-versa.
For each part, pressing the
MIDI
channel number indicator opens a popup to change it.
Pressing the individual Mute buttons mute the selected part.