Effects / Routing
Effect levels and output routing are
configured here.
For each part, you may configure:
-
Output
pair (1~4)
-
Dry
level (0~127), the amount of original
sound from the FM engine
-
Fx1
send level (0~127), the amount of
signal sent to the first effect DSP
-
Fx2
send level (0~127), the amount of
signal sent to the second effect DSP
Each effect DSP can be routed to any output pair, and the effect can be selected by pressing the
“Fx1” and “Fx2” buttons.
Effect selection
The list on the left selects the effect, which
may have a Type depending on the effect,
and one or more parameters.
Knob Assign
In this page, you can assign 6 MIDI Control
Changes to the 6 encoders, which will be
sent when manipulated while EssenceFM is
in Performance mode.
CC Assign button
: The command button
caption shows the current CC and channel
corresponding to the knob. Pushing it
opens a dialog in which you can select CC and channel numbers.
Default Value
(0 ~ 127): This slider assigns a default value to the corresponding knob CC.
Send Default CC Values at performance load
: If checked, the synth will send the 6 default values
to the engine and via the MIDI output (if CC aren’t filtered in global mode)
Содержание Essence FM MKII
Страница 1: ......
Страница 2: ...Preliminary Version 12 12 2019 For reference only...
Страница 30: ...Memo...