Kodak PPS800, Руководство пользователя

Страница: 11 / 20

11
6. WALL CHARGING
before use or storage, plug your kodak ppS800 into the wall until it is fully charged. if the display shows
less than 20% capacity, plug it into a power source, like an ac outlet or a solar panel as soon as possible.
to fully charge the kodak ppS800, it will take about 7 hours.
ATTENTION
Do not use KODAK PPS800 while charging via wall outlet!
only charge the unit when the ambient temperature is between 0°c to +45°c (32°f to 113°f).
end the charging process by switching off the unit and pulling the plug out of the socket.
connect your kodak ppS800 to pV (Solar panel) and then to the Solar charging port. with a 100w input,
e.g. using the kodak Solar panel Sp100, it will take approximately about 10 hours, depending on weather
conditions and positioning of the solar panel.
ATTENTION
Using KODAK PPS800 while charging via solar panel is possible.
No. Alarm LCD Screen Causes
1 every 1 sec.
low battery icon keeps flashing until battery
is charged above 20%
battery capacity <20%
2 every 1 sec.
warning icon keeps flashing until failure is resolved
charging failure
3 every 2 sec. dc output failure
4 every 3 sec. ac output failure
5 every 4 sec. over temperature
6.1. PV (SOLAR PANEL) CHARGING
6.2. DISPLAY
Solar input warning
discharging indicator
ac output
charging indicator
uSb
dc output cigarette lighter
ac input