Specifications
Dimensions in inches (mm·)
TOP VIEW
24
)
SIDE VIEW
(
~-----------------------------33~(~5)--------------~
22~ (565)
_ _
I
~5DIA.(~
/
2.00D' REEL
/
(610m)
I
I
,
16~
(425)
2
Approximate
Weight; pounds (kg):
Projector packed in corrugated
case
for shipping-41
(18.6)
Projector complete-38.5
(17.5)
Speaker unit
(Case
cover)-6.5
(2.9)
/
Maximum 2 inches (51 mm), front control.
Upward lens tilt,
approximately
8 degrees maximum.
Power Service Required:
105- to 125-volt, 60 Hz.
Power Consumed by Projector and Amplifier
on
120-Volt Power line:
550 watts with a 200-watt
projection
lamp.
Projection
Lens:
The lens supplied is a KODAKProjection
EKTANARLens,
2-inch
f/1.6.
Projection
Lamp:
The lamp supplied is a 200-watt,
24-volt, ANSI Code EJL;
200-hour
rating at low lamp setting,
100-hour rating at
medium lamp setting, and 25-hour rating at high lamp setting.
Amplifier
(completely
transistorized)
Rated Continuous
Average Sinewave Power:
25 watts minimum
into an 8-ohm load (supplied speaker)
at a total harmonic distortion
of 5
%
maximum throughout
a
bandwidth
of at least 50 Hz to 7 KHz.
NOTE: The preceding specification
applies for an rms
line voltage of 120 volts at 60 Hz.
Sensitivity:
740 µ.V microphone
channel.
120 mV auxiliary channel.
Speaker:
6 x 9-inch (152 x 229 mm) oval, PM, 8-ohm voice coil.
Speaker Plug and Jack:
1/4
inch (6.3 mm) dia.
Exciter Lamp:
ANSI Code BSK; 6-volt,
l-amp
T-5 bulb; single-contact,
prefocused
base.
Sound Pickup:
Silicon Solar Cell.
Accessories:
KODAKMicrophone,
Model PA-8.
KODAKEKTALITEProjection
Screen, Model 3 (40 x 40).
1
·For ease in reading, the metric conversion is given once per dimension.
J
