Troubleshooting
www.kodak.com/go/support
45
Print button/light
Light status
Cause
Action/solution
Light glows steady
green
The printer dock is ready for
printing.
None required.
Light blinks green
The printer dock is printing.
Light is off
There are no pictures in the
camera or on the card.
None required.
To enable Print:
1
Take pictures.
2
Dock the camera, or
connect a compatible
Kodak card reader
(
page 14
). If using a card
reader, make sure a
memory card is inserted.
The camera is not docked or a
compatible Kodak card reader
is not connected.
The camera is not properly
seated on the connector.
Reseat the camera on the
printer dock (
page 9
).
The camera or card reader is
transferring pictures to the
computer, or has established
an active connection to the
computer.
None required.
When transfer is complete,
press the blinking Transfer
button, .
A PictBridge compatible
device is connected.
None required.
The Print button is disabled;
print command is controlled
from the PictBridge compatible
device. To print from another
source, unplug the PictBridge
compatible device.