46
www.kodak.com/go/support
Troubleshooting
Stored pictures are
corrupted.
■
Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
■
Transfer pictures to the computer (see
page 37
), then format the card
in the camera (
see page 34
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
■
Check the image storage location setting (
see page 32
). If the problem
persists, visit
www.kodak.com/go/m1063support
, and select
Interactive Troubleshooting & Repairs.
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Take another picture.
■
Transfer the picture to the computer (see
page 37
), then format the
card in the camera (
see page 34
).
If the problem persists, visit
www.kodak.com/go/m1063support
, and
select Interactive Troubleshooting & Repairs.
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Picture is too light.
■
Decrease Exposure Compensation (see
page 35
).
■
Turn off the flash, then move back from the subject.
Picture is not clear.
■
Clean the lens (
see page 56
).
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 23.6 in. (60 cm)
between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
If...
Try one or more of the following
