46
www.kodak.com/go/support
Troubleshooting
Camera ready light status
If...
Try one or more of the following
Ready light does
not turn on and the
camera does not
work
■
Turn on the camera (
page 2
).
■
Recharge the battery or install a new one (
page 1
).
■
Mode dial was on when battery was reloaded. Turn Mode dial off, then
back on.
Ready light blinks
green
■
Picture is being processed and saved to the camera. Camera is
operating normally.
■
Camera is connected. Camera is operating normally.
Ready light blinks
red and camera
turns off
■
Recharge the battery or install a new one (
page 1
).
Ready light glows
steady green
■
Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.
Ready light glows
steady orange
■
The Mode dial is set to Favorites. Camera is operating normally.
Ready light blinks
orange
■
Flash is not charged. Wait. Resume picture-taking when the light stops
blinking and turns off.
■
Auto exposure or auto-focus are not set. Release the Shutter button
and recompose the picture.
Ready light glows
steady red
■
Camera’s internal memory or card is full. Transfer pictures to the
computer (
page 15
), delete pictures from camera (
page 13
), switch
image storage locations (
page 30
), or insert card with available
memory (
page 3
).
■
Camera processing memory is full. Wait. Resume picture-taking when
the light turns off.
■
Card is read-only. Change image storage location to internal memory
(
page 30
), or use a different card.
