Page | 22
Getting Started
1.
The Camera is pre-registered to your Parent Unit.
You do not need to register it again unless the
Camera loses its link with the Parent Unit. If you
would like to add an additional camera, please refer
to section 4.2.1.
2. To re-register your Camera, or register a new
Camera, follow the procedure below:
a. Press “ ” on the Parent Unit for the menu bar.
b. Press “ ” or “ ” button to select
, then
“
” to proceed to the next step.
c. Press “
” to add camera, then “
” to
proceed.
d. Press the “ ” button or “ ” button to select
the available camera number. Press “
” to
add a camera unit.
e. You will then see a sign “
” to indicate you to
press and hold the pair button of the Camera
until the first beep then release the pair button.
2.3 Registration (Pairing)
NOTE:
Pairing a Camera that was previously registered
will reset the device and remove it from the previous
account.
The Parent Unit will auto detect and pair to the
Camera. Parent Unit will then display live stream
upon successful pairing.
