40
www.kodak.com/go/support
Troubleshooting
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Transfer the picture to the computer (see
page 35
).
■
Take another picture. If problem continues, try internal memory and/or
another memory card.
Shutter button
does not work.
■
Turn on the camera (see
page 2
).
■
Transfer pictures to the computer (see
page 35
), delete pictures from
the camera (see
page 14
), switch image storage locations (
see
page 27
), or insert a card with available memory (see
page 3
).
Picture is too light.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Decrease Exposure Compensation (see
page 29
).
Picture is not clear.
■
Clean the lens (
see page 48
).
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■
Turn on the flash (see
page 7
).
■
Move so there is no more than 10.5 ft (3.2 m) in wide angle and
5.9 ft (1.8 m) in telephoto between the camera and the subject.
■
Use Fill flash (
see page 7
) or change your position so light is not
behind the subject.
■
Increase Exposure Compensation (see
page 29
).
Camera does not
recognize
SD/SDHC card.
■
Purchase a certified SD or SDHC card.
■
Insert a card into the slot, then push to seat (see
page 3
).
Camera freezes up
when a card is
inserted or
removed.
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
If...
Try one or more of the following
