manualshive.com logo in svg

Kodak A-61514, Руководство пользователя

Поделиться
Скачать
Kodak A-61514 Скачать руководство пользователя страница 34

A-61514 September 2004

31

Problem solving

Occasionally, you may experience a problem with your scanner. In many 
cases, you can easily fix the problem yourself. To perform suggested 
maintenance, refer to the 

Maintenance

 section. You may also need to 

check your scanning application.

Problem

Possible Solution

The scanner will not scan/
feed documents

Make sure that:
• the power cord is plugged in and the power is on.
• the scanner access door is completely closed.
• the proper power-up sequence was followed, the scanner’s green light is on, 

and the software has enabled scanning.

• documents are making contact with the feed module.
• the height of batched documents is less than 10.2 mm (0.4 in.) or 

approximately 150 sheets of 60 g (16 lb.) paper.

• documents meet specifications for size, weight, and type, etc.
• for thicker documents, you lift the gap release button during feeding.
• you check the feed module and separator module for signs of wear, and 

replace these parts if necessary.

You can also power the scanner down and power up again or follow the 
instructions in “System Is Not Responding” in this section.

Calibration has failed

Make sure that:
• the lamps have been on at least three minutes.
• you are using a proper calibration target. Use the 12 in. x 12 in. square 

calibration target (CAT No. 127 1436).

• the transport area is clear of obstructions.

Documents are jamming

Make sure that:
• the output tray and guides are adjusted for the length of documents 

being scanned.

• all jammed documents have been removed from the paper transport area.
• documents meet specifications for size, weight, and type, etc.
• all staples and paper clips have been removed from the documents.
• the separator module and feed module are clean and properly installed.
• the drive rollers are clean.
• the imaging guides are clean.

“False” paper jams 
are occurring

• Make sure that the paper transport area is clean.

35.6 cm (14 in.) or longer 
documents are not feeding or 
are jamming

Make sure that the input and output tray extenders are pulled out to provide 
support for long documents.

Содержание A-61514









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды