Kodak 8650R THERMAL PRINTER Скачать руководство пользователя

Страница: 61 / 110

Operating the printer

October 1997

3-19

Keeping the printer in good working order

To keep the printer in good working order:

•

Keep the printer clean. Keep the surrounding area vacuumed and
litter-free.

•

Protect the printer from tobacco smoke, dust, sand, and liquid spills.

•

Do not place objects on top of the printer.

•

Do not keep anything under the printer. Doing so may block the fan on
the bottom of the printer.

Working with the printer

Follow these guidelines when working with the printer:

•

Keep the plastic dust cover in place when operating the printer.

•

Keep the blue protective cover in place when not using the printer.

•

Remove prints from the output tray ONLY AFTER the printer ejects
them.

•

Do NOT put a print back into the output tray. Doing so can cause jams
and loss of completed prints.

•

Avoid loading more than 100 sheets of paper in the paper tray.

Содержание 8650R THERMAL PRINTER















































































































Результаты поиска

Содержание 8650R THERMAL PRINTER

Отзывы:

Похожие инструкции для 8650R THERMAL PRINTER

Бренды по названию

Популярные бренды

Kodak 8650R THERMAL PRINTER, Руководство оператора

Результаты поиска

Содержание 8650R THERMAL PRINTER

Отзывы:

Похожие инструкции для 8650R THERMAL PRINTER

Бренды по названию

Популярные бренды