B-4
A-61316 April 2010
Settings in each User
mode function
U1: Special Print mode
— this function is not available.
U2: Engineering Enhancement mode
— slight image distortion
occurring in the scan direction can be corrected with this function.
1. Select
U2
in the User mode.
2. Press the
Exposure
Mode
key to display d*.
3. Press the
Exposure
Adjustment
key (Darker or Lighter) to select
the desired setting value.
4. Press the
Start
key to validate the setting.
NOTE: This setting returns to the default value when the power switch
is turned off. You can register this setting by using the Job
Program function.
U3: Auto Power Save
— time it takes the unit to be automatically set
into the Power Save mode.
1. Select
U3
in the User mode.
2. Press the
Exposure
Mode
key to display d*.
3. Press the
Exposure
Adjustment
key (Darker or Lighter) to select
the desired setting value.
4. Press the
Start
key to validate the setting.
NOTE:
For USA and Canada only.
The Auto Power Save function is
only available if the Energy Star Kit is mounted on the scanner.
Code
Setting Value
Initial Setting
d0
0 mm
d1
0.5 mm
d2
1.0 mm
d3
1.5 mm
*
d4
2.0 mm
d5
2.5 mm
d6
3.0 mm
d7
3.5 mm
d8
4.0 mm
Code
Setting Value
Initial Setting
d1
Auto Power Save (15 min.)
*
d2
Auto Power Save (30 min.)
d3
Auto Power Save (60 min.)
Before correction
After correction
