50
www.kodak.com/go/support
Troubleshooting
Stored pictures are
corrupted.
■
Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
■
Transfer pictures to the computer (see
page 45
), then format the card
in the camera (
see page 34
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
■
Check the image storage location setting (
see page 33
).
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Transfer the picture to the computer (see
page 45
), then format the
card in the camera (
see page 34
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Picture is too light.
■
Decrease Exposure Compensation (see
page 36
).
■
Turn off the flash, then move back from the subject.
Picture is not clear.
■
Clean the lens (
see page 60
).
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■
Turn on the flash (see
page 8
).
■
Move so that the distance between you and the subject is within the
effective flash range (
see page 58
).
■
Use Fill flash (
page 8
) or change your position so light is not behind
the subject.
■
Increase Exposure Compensation (see
page 36
).
If...
Try one or more of the following
