Product connection diagram
Name of Each Part
Side
Back
Front
Handset
Lobbyphone
connection
terminal
1) Install wall-hanger bracket on wall with
attached Vis.
2,3) Connect wiring to interphone back terminal
referring to product connection diagram.
4) Hang interphone on wall-hanging, and fix
interphone on wall- hanger bracket using
attached Vis.
■ Interphone Installation
Instructions for operation
line
connection
Wall
4X25mm
Screw
1
2
3
4
Back
Wall
■ Communication with Audio lobbyphone
-
Check the suitability of the lines for installing when you use the exiting lines.
-
Do the wiring work by using the designed material.
-
Connect the electric wire with the designed ways and ground.
When the visitor
presses the call
button for certain
house on the
audio lobbyphone
The indoor station
is ringing.
To release the
door, press
the “Door open”
button.
Pick up the handset
and communicate
with a visitor. After end
of communication,
return the handset
where it is locked.
1
3
3
3
3
3
1
1
1
1
Specifications
Components of product
Model No.
Power Source
Power Consumption
Communication System
Wiring
Dimesion
KIP-304
DC 12V (sourced from lobbyphone)
MAX 5W
Handset
3+n (Polarity)
(W)75mmX(H)176mmX(D)52mm
Screw for fixing
interphone
4X25mm 2ea
4 pin cable for interphone &
audio lobbyphone
1. GND
2. AUDIO-SPEAKER
3. AUDIO-MIC
4. SIGNAL
A Wall hanger frame
Interphone
AUDIO LOBBYPHONE
KIP-304 NO.1 KIP-304 NO.2
KIP-304 NO.1~8
polarity
4 5 6 7 8
1 2 3
3
2
1
1
4
3
2
1
Installation
