KOCOM KCV-802R Скачать руководство пользователя

Страница: 5 / 16

Cautions for Use

Cautions for Installation

Abovementioned cases may cause troubles in the product.

Please be careful to the cautions in use of the product

●

This product is designed as a precision electronic device, so do not disassemble it at user's discretion.

●

Comply with the specifications provided by KOCOM in installation of the product.

●

Do not touch the product with foreign things (e.g. sticker, magnet, bottle opener, iron chopsticks, etc.)

and do not bring them in the product.
(It may not only shorten the durability of the product but also bring danger to users.)

●

During the rainy season, rainwater may flow in the product along its wiring and affect the system.

So, the end of wiring is required to finish with letter 'U' type.

●

Do not place the product near humidifier, heater, etc. High temperature and humidity may cause troubles.

●

Do not drop, or give a strong impact on, main body and gate camera.

●

Do not place the main body near the things emitting strong magnetism (e.g. TV, speaker, etc)

(it may cause the drift or distortion of screen, resulting in troubles)

●

Do not clean the product with wet hands, or using volatile liquids such as benzene or thinner.

●

Clean up camera and window part of main body from time to time to keep fine and clear image quality.

●

This product is designed as a precision electronic device, so do not disassemble it at user's discretion.

●

Call from, and two-way communication with, multi-family lobby-phone (KLP-100 Series)

●

Two-way call and communication with multi-family security phone (KIP-120 Series)

●

Two-way call and communication between house devices using extension line (KIV-212, KIP-603, KCV-802R, KIV-102)

●

Call from, and two-way communication with, door camera

●

Two-way call and communication with a privately installed exchanger or switchboard

●

Going out of house or absence (Security) setup

(When a user calls a door camera, images taken by the door camera is automatically recorded.)

●

Selection of a lobby image and view of the selected image

●

Color control, Tone ring change

●

ID setting of house device

●

Input of guard office No. in a privately installed exchanger

●

Input of the password No. for opening of lobby door in a privately installed exchanger

●

Prior setting of multi-family security, analogue security, and private exchanger

●

Special connection points ON/OFF

●

Image screen setting

●

Interlocking with PIR SENSOR, CCTV

Key Features

●

This product is a multi-functional house device equipped with 7inch(17.8cm)LCD suitable to multi-family houses.

●

It provides functions such as identification of, and communication with, a visitor at lobby-phone and automatic

open/close of a common gate where a lobby-phone is installed using house device. It may also, if equipped with
multi-family security phone, provides two-way call and communication with guard office.

●

In addition, this product can be compatibly used with any existing analogue-type security phone.

When a user is employing an analogue-type security, he/she may purchase a separate module for analogue security.
This product is designed to enable a user to directly open the lower part of the product and connect the module to that part.

●

As this product, basically adopts OSD and image memory functions, it may control and adjust

each function using its arrow key and, if a user is going out of house or selects the function, save and store scenes
of images taken.

●

Moreover, this product provides a user with two-way call and communication with a privately installed exchanger or

switchboard. Even in a power failure, a user can communicate with the exchanger.
(In this case, however, a privately installed exchanger should be running normally.)

Components

Overview

4 pin cable for camera &

sub audio phone(KDP-602G)

Wiring Lines of Multi-

home Main Line

4Px2

Wiring Lines of

Security Sensor

Wiring Lines of

Private Exchanger

Wiring Lines of