12
13
Name of Each Part
Name of Each Part
1
7
2
3
4
5
6
1
Name
No
2
3
4
5
6
7
Brief Description
Handset
used in communication (sending/receiving) between camera and the extension line of interphone
Security/
Lobby Button
used in a call to security phone or an incoming call from security or lobby phone
used in a call to/from multi-family interphone and OSD menu cancle
◁
Left
Button
(A)Pressing this button with the handset being hung up, a user can view images from door camera 1 or 2.)
(B) used as Left button in setting OSD menu.
(A) saves (RECORD) images from Camera 1 & 2
(B) used as Up button in setting OSD menu
△
Up
Button
(A) plays images saved in standby mode - used as Forward key
(B) used as Right button in setting OSD menu
▷
Right
Button
(A) used as Delete key in playing images
(B) used as Down button in setting OSD menu
▽
Down
Button
(A) Entrance into User's OSD (Press the button lightly to enter into User's OSD)
(B) Change of User's OSD MENU
(C) Entrance into Installer's OSD (Press the button for more than 5 seconds to enter into Installer's OSD)
Menu/
OK Button
used in a call and communication with private exchanger
TEL/Absence
Button
Extension
Line Button
works door open function of camera when a user press this button
with communicating with gate camera
If a user presses one or more of 12 keys for extension line after pressing Extension Line button,
a call signal is sent to a house device or an exchanger phone to which the selected number is assigned.
※
In case a trouble arises from the user's arbitrary modification of installer's OSD menu, charges for any after-sales service
(A/S) due to the trouble should be paid by a user even during the warranted A/S period.
Door
Open Button
12 Keys for
Extension Line
/
Front
8
Name
Brief Description
No
Tone Ring
Wall-mounting
Modular Jack
adjusts volume of tone ring (low to loud)Volume Switch
a jack for handset connection cord
a hole for a screw used in fixation of main body in its wall-Fixation Part
Power Switch
on/off switch for main power supply for monitor
9
10
11
Out Terminal
12
Devices for each of the connection points
Output Connection
Parts
A : Analogue-type Security Master(2P) D : Multi-family Main Wiring(9P)
B : Camera 1(4P)
E : Security Sensor(3P)
C : Camera 2(4P)
F : Program write port(7P)
13
Monitor
Door Camera
Monitor
A
B
D
E
C
F
Bottom View
Rear View
KC-MC30
KC-MC31
KC-MC30
KC-MC31
1. C-Mic : To communicate with Monitor
2. Camera Lens
3. LED
4. Speaker : When visitor calls, the voice from monitor comes out of the speaker.
5. Call Button : By pressing the button, the related house will be called.
6. Name plate
7. Screw cap
FG(FRAME GROUND)
FG(FRAME GROUND)
①
②
③
④
⑤
⑥
⑦
⑧
⑧
①
②
③
④
⑤
⑥
① : VCC
② : GND
③ : Audio
④ : Video
⑤&⑥ : Door (Non-Polarity)
⑦ : Camera angle knob
(Only KC-MC30)
⑧ : Wire clamp
1
2
3
4
5
6
1
2
3
4
5
7
12
13
A
B
D
E
F
C
8
9
10
11
