How to Set OSD MENU SET UP Functions
29
■
COLOR (Electronic Day & Night)
◎
AUTO : Automatically discern day or night settings and switches to the appropriate mode for the surrounding conditions.
While mode is switched to COLOR during the day, it is switched to B/W at night.
◎
ON : Mode isn't automatically switched and fixed at COLOR.
■
SYNC
: In the area of 60Hz(50Hz), a user can put output phases of several units in tune using Line Lock
function without a synchronizing signal generator.
SYNC
▶PHASE
l - - - - - I 225
[Notes]
If AFC is set as OFF, COLOR function are not available.
※
Camera is more liable to be out of focus under an infrared lighting than general ones.
INT : Internal Synchronization Method.
LL : Line Lock Method (AC 24V).
Press SET UP button.
A user can select a desired phase among 0 to 359.
[Note]
In a product using DC 12V, SYNC is fixed at "INT" mode.
30
■
MOTION DETECTION
MOTION DETECTION
Press SET to Return
AREA 1
▶AREA SEL
AREA STATE
ON
I- - I - - I 10
I- I - - - I 25
I- - I - - I 20
I- - I - - I 40
TOP
DOWN
LIGHT
RIGHT
- This product can detect motions of subject in the 4 areas on screen. During the motion detection,
a message "MOTION DETECTION" is displayed, which enables a person to do his job effectively.
The motions of subject are detected by the differences in its
contour, brightness, and color.
(1) Press SET UP button
- OFF : deselects the function.
- ON : detects a MOTION occurred in a selected area.
(2) In AREA SEL, select one among 4 areas where a user does
motion detection.
(3) Change the state of a selected area to ON.
(4) Using UP, DOWN or LEFT, RIGHT button,
adjust the size of detection area.
(5) Press SET UP button to save the changed value and finish.
