Kobold VKG, Руководство по эксплуатации

Страница: 5 / 28

VKG
VKG K09/0322 Page 5
6. Mechanical Connection
Before installation:

The instrument may be mounted in any position. No modifications are neces-
sary. The flow takes place in the direction of the arrow (on the label).

Remove all transport packing and ascertain that no packing material is left in
the instrument.

Sealing of the connection threads should be carried out with Teflon tape or
similar.

During installation of the instrument, it must be checked that no strong forces
will be applied to the connections. We recommend fixing the inlet and outlet pipes
mechanically at approximately 50 mm from each instrument connection.

The instrument must not be installed within an induction field.
Attention! The threaded connection of the instrument must be
tightened with a suitable size of open ended spanner. Otherwise,
the housing may be stressed which could lead to breakage of
the instrument.

If possible, check directly after mechanical installation that the connection
thread to pipe is fully sealed (see section commissioning)
Attention! Please note that when installed in open spaces freezing
of the medium can lead to breakage of the glass tube.

Please ascertain whether the allowable
maximum operating pressure and operating
temperature of the instruments will not be
exceeded (see table: standard material
combinations).