Kobold NSC, Руководство по эксплуатации

Страница: 4 / 24

NSC
Page 4 DT0307
6. Mechanical connection
The NSC has a thread of 1”BSP male. The sensitive part of the probe goes from
the PP isolator to the end of the probe.
Check that lenght of probe is according the level to be detected.
When the housing is installed in the outdoor it is recommended to protect it against
sun radiation and rain by means of a small roof.
When installing the probe of the NSC by means of an extension sleeve, the max.
lenght of this sleeve must be 70mm to avoid short-circuit in between the tank and
the probe due to product accumulation inside the sleeve.