Kobold NRM Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 52

Kobold NRM Скачать руководство пользователя страница 4

NRM

page 4

NRM K06/0422

2. Note

Please read these operating instructions before unpacking and putting the unit into
operation. Follow the instructions precisely as described herein.
The instruction manuals on our website www.kobold.com are always for currently
manufactured  version  of  our  products.  Due  to  technical  changes,  the  instruction
manuals  available  online  may  not  always  correspond  to  the  product  version  you
have  purchased.  If  you  need  an  instruction  manual  that  corresponds  to  the
purchased  product  version,  you  can  request  it  from  us  free  of  charge  by  email
([email protected])  in  PDF  format,  specifying  the  relevant  invoice  number  and
serial  number.  If  you  wish,  the  operating  instructions  can  also  be  sent  to  you  by
post in paper form against an applicable postage fee.

The devices are only to be used, maintained and serviced by persons familiar with
these operating instructions and in accordance with local regulations applying to
Health & Safety and prevention of accidents.

When used in machines, the measuring unit should be used only when the
machines fulfil the EC-machine guidelines.

3. Instrument Inspection

Instruments are inspected before shipping and sent out in perfect condition.
Should damage to a device be visible, we recommend a thorough inspection of the
delivery packaging. In case of damage, please inform your parcel service /
forwarding agent immediately, since they are responsible for damages during
transit.

Scope of delivery:

The standard delivery includes:



Non-Contact Radar Level Transmitter model: NRM

4. Regulation Use

Any use of the Non-Contact Radar Level Transmitter, model: NRM, which exceeds
the manufacturer’s specification, may invalidate its warranty. Therefore, any
resulting damage is not the responsibility of the manufacturer. The user assumes
all risk for such usage.

«
...
2
3
4
5
6
...
»

Содержание NRM





















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды