Kobold NRM, Руководство по эксплуатации

Страница: 14 / 52

NRM
page 14 NRM K06/0422
6. Indication of Primary Value simulation. In this case the display and output show
the values of the simulation and not the measured values.
7. Indication of active (
V olume / M ass T able - VMT) calculation mode.
During active simulation the critical measurement errors will be displayed to give
information to the user.
A, Calculated value of the output current.
After the dimension, the mode of current output is indicated by inverse inscription:
M
Manual mode (see 8.3.2.1)
H
HART address is not 0, so output current has become overwritten to 4 mA (see
8.3.2.1)
E!
Analogue transmission reacts to a programmed failure condition
if an upper or lower fault current is programmed (see 8.3.2.4)
B, Output range (4-20 mA) indicated in a bargraph.
The bottom of the bargraph is assigned to 4 mA and the top is assigned to
20 mA.
C, Indication of Menu Lock:
 If key symbol is visible, the unit is protected with a password. When entering the
menu, the instrument asks for the correct password (see 8.3.6.1).

If REM message is visible, the instrument is in remote programming mode and
the main menu cannot be accessed.
Errors occurred during the measurement can be seen at the bottom line of the
display.