21
Operating instructions for KME flow meter for compressed air and gases
Fig. 20
Unscrew mounting screws
Fig. 21
Remove transmitter
To operate the pipeline without a transmitter, see 3.5.1 on page 12
7.2 Cleaning the sensing head
Do not use abrasive cleaning agents and organic solvents containing halogen or acetone.
Clean the sens head by carefully dipping into warm water or isopropanol.
Isopropanol is recommended for contamination with greases or oils.
Do not touch or rub the sensor element within the sensing head.
Allow the sensing head to dry free.
7.3 Ordering guide for accessories
Designation
Order number
M12 female connector for self assembly, plastic
ZUB-KAB-12 D500
M12 female connector for self assembly, Quikon
ZUB-KAB-12 Q000
Connecting cable, 2 m PUR-cable
ZUB-KAB-12 K002
Connecting cable, 5 m PUR-cable
ZUB-KAB-12 K002
Sealing plugs for the gauge mounting block (for operating the pipeline
without the transmitter unit)
ERS-KME-DS38
