10
Operating instructions for KME flow meter for compressed air and gases
3.2.1 Process pressure
the pressure in the pipeline may not exceed 16 bar (232 psi).
Before mounting or removing the transmitter, the pipeline must be
depressurised.
Due to its measuring principle, the measurement accuracy of the KME is quasi-independent of
the actual process pressure. Besides, the device is factory adjusted at 7 bar (102 psi) absolute
pressure. For normal requirements pressure compensation is not necessary. For best measure-
ment accuracy, the actual working pressure can be set via display menu or via Product Configu
-
rator Software.
3.3 Installation position
Vertical mounting
+
Horizontal mounting, transmitter at top
+
Horizontal mounting, transmitter horizontal
+
Horizontal mounting, transmitter at bottom
-
Flow Direction
Flow Direction
Flow Direction
Flow Direction
Flow Direction
Flow Direction
Flow Direction
Flow Direction
+ ...
Recommended installation position
- ...... Not recommended
