HND-P105
page 12
HND-P105 K05/0117
9. Technical
Information
Measuring ranges:
Display range:
-19999 ... +19999 digit, depending on connected
sensor
Resolution:
depending on connected sensor
Pressure units:
mbar, bar, kPa, MPa, mmHg, PSI, mH
2
O
Accuracy: (typ.)
± 0,1 % F.S. (at nominal temperature)
Measuring rate:
4 meas./sec
Nominal temperature:
25 °C
Sensor:
All sensors of the HND-PS-series without
calibration can be connected.
Connection:
Mini-DIN-Socket with locking mechanism
The sensor will automatically be detected, the
measurement range settings are set referring to
sensor
data
Additional Functions:
Power-Off-Function:
Device will be automatically switched off if no key
is pressed/no interface communication takes
place for the time of the power-off delay. The
power-off delay can be set to values between 1
and 120 min.; it can be completely deactivated.
Display:
2 four-digit LCDs (12.4mm high and 7mm high)
for measuring values, and for min/max
memories, hold function, etc. As well as
additional functional arrows.
Pushbuttons:
6 membrane keys
Interface:
Serial interface (3.5 mm jack) can be connected
to HND-Z031 or HND-Z032 to RS232 or USB
interface of a PC via electrically isolated interface
adapter.
Power supply:
9 V-battery, type: IEC 6F22
(included in the scope of delivery)
As well as additional d.c. connector (diameter of
internal pin 1.9 mm) for external 10.5-12V direct
voltage supply. (suitable power supply:
GNG10/3000)
Power consumption:
<1.6 mA
Low battery warning:
`bAt`
Housing:
impact-resistant ABS, membrane keyboard,
transparent panel, Front side IP65
Dimensions:
142 x 71 x 26 mm (LxWxD)
Weight: approx.150
g
Working temperature:
-25...+50 °C
Allowable rel. humidity:
0...95%RH (not condensing)
Storage temperature:
-25...+70 °C
