Kobold DAG-A44 Series, Руководство по эксплуатации

Страница: 8 / 18

DAG-A44
page 8 DAG-A44 K05/0123
8. Setting up the device
8.1 Switching on
Once the installation is complete, you can start the device by applying the current
loop. Check beforehand once again that all the electrical connections are correct.
Starting sequence
For 1 second during the switch-on progress, the segment test ( 8 8 8 8 ) is displayed,
followed by an indication of the software type and, after that, also for 1 second, the
software version. After the start-up sequence, the device switches to
operation/display mode.
8.2 Standard parameterization
To be able to parameterize the display, press the [P] key in operating mode for 1
second. The display then changes to the meu level with the first menu item TYPE .