kobi NET-KOBI-IP-16CH Скачать руководство пользователя

Страница: 52 / 181

Parameters Setting for Recording
1)

Select

Record

tab page to configure. You can configure the stream type, the resolution, and other

parameters on your demand.

•

Pre-record:

The time you set to record before the scheduled time or event. For example, when an

alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera
records it at 9:59:55.

•

Post-record:

The time you set to record after the event or the scheduled time. For example, when

an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it
records till 11:00:05.

•

Expired Time:

The expired time is the longest time for a record file to be kept in the HDD, if the

deadline is reached, the file will be deleted. You can set the expired time to 0, and then the file will
not be deleted. The actual keeping time for the file should be determined by the capacity of the
HDD.

•

Redundant Record:

Enabling redundant record means you save the record in the redundant HDD.

See

Chapter Configuring Redundant Recording

•

Record Audio:

Check the checkbox to enable or disable audio recording.

Click

Apply

to save the settings.

Note:

The redundant record is to decide whether you want the camera to save the record files in the

redundant HDD. You must configure the redundant HDD in HDD settings. For detailed information, see

Chapter 10.3.2 Setting HDD Property

Note:

The parameters of Main Stream (Event) are read-only.

Parameters Settings for Sub-stream
1)

Enter the Sub-stream tab page.

Figure 5. 4

Sub-stream Parameters

Configure the parameters of the camera.

Click

Apply

to save the settings.

Содержание NET-KOBI-IP-16CH






















































































































































































Результаты поиска

Содержание NET-KOBI-IP-16CH

Отзывы:

Похожие инструкции для NET-KOBI-IP-16CH

Бренды по названию

Популярные бренды

kobi NET-KOBI-IP-16CH, Руководство пользователя

Результаты поиска

Содержание NET-KOBI-IP-16CH

Отзывы:

Похожие инструкции для NET-KOBI-IP-16CH

Бренды по названию

Популярные бренды