7170 Jog Lever
Kobelt Manufacturing Co. Ltd.
Rev B
MNL_7170
13 of 24
7
T
ROUBLESHOOTING
If you encounter problems with the operation of your product, please refer to the trouble-
shooting suggestions before contacting Kobelt for assistance. If the steps below do not
resolve your issue, please reach out either Kobelt directly or our Dealers in your area.
Table 4: Common Solutions
Problem
(Issue encountered)
Cause
(What it means)
Corrective Action
(What to do)
Jog lever action is
reversed.
Wiring is backwards.
1.
Swap the Switch A and Switch
B output wires to their
respective system connections.
Jog lever does not
move rudder at all.
Wiring is wrong.
1.
Check wiring.
2.
Refer to system design
drawing for proper wiring.
The rest of the system
isn’t hooked up
correctly.
1.
Check system wiring.
2.
Confirm wiring to Jog Lever.
Broken switch or contact.
1.
Use a multi-meter to monitor
the resistance of the wiring
between switch contacts.
2.
Check for normal operation of
each switch by measuring the
connection while jogging the
lever.
3.
Check both Switch A and
Switch B directions.
Replace any damaged
switches.
