KOBE KBE-270-4170K, Руководство пользователя

Страница: 2 / 10

2 - GB
19
AIR TOOLS
CZ
PNEUMATICKÉ NÁŘADĺ LEVEGŐSGÉPEK NARZĘDZIA PNEUMATYCZNE
HU PL
KOBE PRODUCTS carry a one years manufacturers warranty.
KOBE PRODUCTS are designed and produced to the highest standards and specifications.
KOBE PRODUCTS are fully guaranteed against faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
QUALITY GUARANTEE & WARRANTY
KOBE PROFESSIONAL POWER TOOLS have been specifically designed to help you work
SAFELY and EFFICIENTLY . Your care and good judgment are the best protection against injury, but always
ensure that the appropriate safety equipment is worn. All possible hazards cannot be covered here, but the
most relevant ones have been highlighted.
SAFETY INSTRUCTIONS
You have purchased a quality industrial product that is designed for high perform-
ance and long service life. If correct use, safety and maintenance
procedures are observed this machine will last for many years.
GENERAL OPERATING HAZARDS
l ALWAYS ensure all users are physically able and
competent to handle the size, weight and power
of the tools and have received appropriate training
to perform the task.
l ALWAYS be aware of the tool rundown time.
l ALWAYS ensure the tool is kept in a good working
condition. DO NOT use the tool if any parts are
missing or damaged.
l ALWAYS inspect the air tool for cracks or excessive
wear before connecting and during use.
l ALWAYS store the tool in a dry, secure place away
from children.
l ALWAYS check for damaged or loose parts and
fittings.
l ALWAYS use recommended attachments or parts.
l ALWAYS avoid accidental starting of the tool by
disconnecting it before replacing accessories or
repairing.
l NEVER operate the tool when tired or under
the influence of alcohol/prescription or
non-prescription drugs.
l NEVER operate if any parts are missing or damaged.
l
NEVER leave the tool running whilst unattended.
l NEVER modify the tool or accessories and only
use it for the task for which it has been designed.
l NEVER force or apply excessive pressure on
the tool.
l NEVER touch moving or active parts of the tool
or accessories.
l NEVER
work in a combustible atmosphere.
l NEVER allow children to use or play with the tool.
WORKPLACE HAZARDS
l
ALWAYS comply with Health & Safety regulations.
l ALWAYS be aware of excess hose around the
work place.
l NEVER carry a tool by the air hose or with your
fingers on the trigger whilst connected to an air
supply.
PERSONAL PROTECTION
l ALWAYS ensure that all long hair, loose clothing
& jewelry, etc., are secured or removed.
l AVOID wearing watches, rings or bracelets whilst
using this tool.
SPECIFIC OPERATING HAZARDS
l ALWAYS ensure all accessories are rated to the
“Free” speed of the air tool and intact before fitting
or using.
l ALWAYS use air tool attachments that are in good
condition and are designed to be used with the
tool.
l ALWAYS be aware of the risk of crushing between
the tool and the workpiece due to sudden move-
ment or reaction forces.
l ALWAYS shut off air supply, drain hose of air pres-
sure and disconnect tools from air supply when
not in use, before changing accessories or when
making repairs.
l NEVER apply additional or over excessive force
to the air tool.
l NEVER make contact with electric power sources
as this tool is not insulated.
l NEVER exceed the maximum air pressure of
the tool.
KBE-270-4170K_Instructions_PP_Layout 1 01/11/2010 09:41 Page 2