KOB KOB PYRTEC SERIES, Инструкция по сборке и установке

Страница: 29 / 40

Spec Sheet
PYRTEC Pyrocontrol
Output Management System
KÖB & SCHÄFER GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: office@koeb-schaefer.com
Subject to technical changes.
7810-2
2006-07-01_E
Requirement for additional heat generator [Item No: PYR-KP0]
Function:
Either individually or together with the PYRTEC biomass boiler, the additional
heat generator supplies the heat accumulator, executed as a hydraulic switcher
(see Spec Sheet 7960). The triggering is carried out such that the additional
heat generator covers the peak required, and the biomass boiler does so for
the base load, the sluggishness of the biomass boiler being taken into account.
While the additional heat generator is in the operational phase, the boiler pump
is in operation and the motor-driven shut-off device open.
This system comes with the following items:
- Selector button
- Contactor and motor contactor for boiler pump for the additional heat generator
- Triggering system for motor for shut-off device; OPEN/SHUT regulation
- Floating output contact for the triggering system for the burner
Requirement for additional heat generator
[Item No: PYR-KP1]
Function:
Either individually or together with the PYRTEC biomass boiler, the additional
heat generator supplies the heat accumulator, executed as a hydraulic switcher
(see Spec Sheet 7960). The triggering is carried out such that the additional
heat generator covers the peak required, and the biomass boiler does so for
the base load, the sluggishness of the biomass boiler being taken into account.
While the additional heat generator is in the operational phase, the boiler pump
is in operation and the regulation is activated for the boiler mixer.
This system comes with the following items:
- Selector button
- Contactor and motor contactor for the boiler pump for the additional heat generator
- Controller for the motor for the boiler mixer; continuously regulated to a constant return flow temperature
- Floating output contact for the triggering system for the burner
- PT100 sensor, incl. dipping shell, 1/2 " x 280 mm, uninstalled, (installation, return flow, additional heat generator)
Visualisation system, internal
[Item No: PYR-KVI]
All the data is conducted to the PC via an RS 232 serial interface in the control cabinet over a data line (max. 30 m) to
the PC. The current operational data for the boiler plant is visually shown on a function display with all the possibilities for
entering values and functions as well as reading out the operational states (exception: "Start Boiler"). All the operational
data is archived on a cyclical basis and can be graphically evaluated in a very simply fashion. The PC and data line are
not included in the price.
This system comes with the following items:
- Serial interface, RS 232
-
CD with visualisation software and installation instructions
Note: regarding data line for "Visualisation system, internal", see Spec Sheet 4090.
Note requirements for PC provided by the customer:
Operating system: Windows 98 / 2000 / XP
Available hard disk storage space: at least 50 MB
RAM: at least 128 MB RAM
Per boiler: 1 available serial interface