SLED-MSRIC
Quick Guide
See Reference Manual for more detailed information.
to purchase additional KDCs and accessories.
QG_SLED-MSRIC_20210728 p7
Operation
3.1
Micro USB Port
The SLED-MSRIC has its own USB port on the side.
For KDC470 (KDCSLED-MSRIC), the port is used to upgrade the MSRIC firmware.
For SKXPro/5 (SKXSLED-MSRKC), the port is used to upgrade the MSRIC firmware and used for the data
communication with SKXPro/5 and with XCover Pro/5 phone.
3.2
LED Indicator
The SLED-MSRIC has one set of LEDs (two LEDs) on the front.
If the IC Card is inserted and read successfully, the LED turns green. If the reading is failed, it turns red.
If the magnetic card is swiped and read successfully, the LED stays lights green for 0.3 seconds and if not, it
says in red for 0.3 seconds.
For KDC470 (KDCSLED-MSRIC), the port is used to upgrade the MSRIC firmware.
