V1.0 / 20.03.2015 3 / 5
CHROMOFLEX
®
Pro
KNX DIN-Rail ECO
The modules should be provided with min. 10 Volts; the maximum voltage of the
CHROMOFLEX
®
Pro
KNX
is 48 Volts.
Fig. 3
6.1
CHROMOFLEX
®
Pro
KNX DIN-Rail ECO CV
„CV“ is an abbreviation for constant voltage.
This model does not have any internal current regulator. Supply voltage is passed through and the voltage of the
power supply must match the voltage of the LED stripe. So if the LED strip requires 12 volts, this must also be the
output voltage of the power supply.
Note: LED stripes of 10 Volts, 12 Volts and 24 Volts are offered on the market. Depending on the cable length the
used LEDs might need very high currents.
Note: We deliver flexible stripes on reels in length of max. 6 metres, with a power consumption of about 1 Amperes
at 24 Volts per color.
6.2 Connection options:
During the installation, make sure that the maximum values are not exceeded and the right type of wiring is chosen.
Fig. 4 (Connection up to 2,2 Ampere per channel)
Notes / additions
At the output channels please
- avoid reverse polarity
- note correct voltage
- ensure that the power per output channel
is not exceeded
- never connect current-controlled LEDs (CC)
