KNOVA KN SCM-09, Руководство пользователя

Страница: 2 / 20

Index ................................................................................. 1
Product specifications ...................................................... 1
Safety instructions ........................................................... 1
Electrical requirements .................................................... 2
Accessories and attachments .......................................... 3
Carton contents ............................................................... 3 Installation ...................................................................... 3
Adjusting ......................................................................... 4
Operations ......................................................................
7
Maintenance ................................................................... 7
Parts list .......................................................................... 8
Assembly diagram ..........................................................
9
PRODUCT SPECIFICATIONS
Model
Motor:
Throat:
Cutting depth:
Speed change:
INDEX
1
SAFETY INSTRUCTIONS
KN SCM-09
1/2 HP (300 watts) 120V, 60 Hz.
9” (228 mm)
3.5” (90 mm)
1 Idle speed:
Table tilt:
Table size:
Blade length:
Width range:
750 m/min
0º - 45º
11-3/4” x 11-3/4” (300 x 300 mm)
62-1/64” (1,575 mm)
1/8” - 25/64” (3 - 10 mm)
Attention: Please choose the correct power supply, voltage and frequency shown on the label of your band saw .
WARNING
When using electric tools, basic safety precautions, including the following, should always be followed
to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product
and save the instructions.
GENERAL SAFETY INSTRUCTIONS
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power tools
in damp or wet locations. Keep work area well lit. Do not
use power tools where there is risk to cause fire or
explosion.
3. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away.
Do not let visitors touch the tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tool.
When not in use, tools should be stored in a dry, high
of locked up place, out of reach of children.
6. Do not force the tool.
It will do the job better and safer at rate for which it was
intended.
7. Use the right tool.
Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes not
intended; for example, do not use circular saws to cut
tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
9. Use safety glasses and hearing protection.
Also use face or dust mask if the cutting operation
is dusty.
10. Connect dust extraction equipment.
If devices are provided for the connection for dust
extraction and collection facilities ensure these are
connected and properly used.
Net / gross
weight:
19 / 22 kg
11. Do not abuse the cord.
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools where there is risk to cause
fire or explosion.
3. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away.
Do not let visitors touch the tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tool.
When not in use, tools should be stored in a dry, high
of locked up place, out of reach of children.
6. Do not force the tool.
It will do the job better and safer at rate for which it
was intended.
7. Use the right tool.
Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes not
intended; for example, do not use circular saws to cut
tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
9. Use safety glasses and hearing protection.
Also use face or dust mask if the cutting operation
is dusty.
10. Connect dust extraction equipment.
If devices are provided for the connection for dust
extraction and collection facilities ensure these are
connected and properly used.
11. Do not abuse the cord.