KNOVA KN SCM-05P, Руководство пользователя

Страница: 6 / 24

SAFETY INSTRUCTIONS FOR PORTABLE BAND SAW
> Wear suitable gloves to reduce the
vibration effects on the user.
> Use tools with the lowest vibration when
there is a choice.
> Include vibration-free periods each day
of work.
> Grip tool as lightly as possible (while still
keeping safe control of it). Let the tool do
the work.
> To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
• This tool should not be used by people
under the age of 16 years
• This tool is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the tool by a person
responsible for their safety
• Ensure that children do not play with
the tool
• Always disconnect plug from power
source before making any adjustment
or changing any accessory
• Connect the tool via a fault current (FI)
circuit breaker with a triggering current
of 30 mA maximum
• After switching off the tool, never stop
the rotation of the accessory by a
lateral force applied against it
Blade Installation and Replacement
Turn the Tension Handle A clockwise to
release Blade tension Set the blade into
both Guide Bearings J, making sure the
Blade is centered on them Hold the blade
on the guides and push in. Make sure the
blade evenly fits around the wheels.
Turn the Tension Handle A until the blade
is taut and the handle “Tight”.
Plug in the tool and put on your ear/eye
protection, and turn on the tool. Inspect
the blade and make sure it runs steady
and evenly around the wheels, and that
the teeth are pointed in the correct
direction.
Guide Bar Assembly
Assemble the Guide Bar G to the
bandsaw before operation Release the
Screws I on the Frame.
Move the Guide Bar G around the blade
as shown 3 , then lock the screws.
Switching the machine on and off
Turn on/off the Portable Band Saw by
switch F electronic speed control.
Adjust the speed by turning the speed dial
E, user can choose different speed for
different cutting materials.
• Before using the tool for the first time,
it is recommended to receive practical
information
• Always check that the supply voltage is
the same as the voltage indicated on
the nameplate of the tool (tools with
a rating of 230V or 240V can also be
connected to a 220V supply)
• Use suitable detectors to find hidden
utility lines or call the local utility
company for assistance(contact with
electric lines can lead to fire or
electrical shock; damaging a gas line
can result in an explosion; penetrating a
water pipe will cause property damage
or an electrical shock)
• Do not work materials containing
asbestos (asbestos is considered
carcinogenic)
OUTDOOR USE
AFTER USE
USE
GENERAL
BEFORE USE
• Dust from material such as paint
containing lead, some wood species,
minerals and metal may be harmful
(contact with or inhalation of the dust
may cause allergic reactions and/or
respiratory diseases to the operator or
bystanders); wear a dust mask and
work with a dust extraction device
when connectable
• Certain kinds of dust are classified
as carcinogenic (such as oak and beech
dust) especially in conjunction with
additives for wood conditioning; wear a
dust mask and work with a dust
extraction device when connectable
• Follow the dust-related national
requirements for the materials you
want to work with
• Do not clamp the tool in a vice
• Use completely unrolled and safe
extension cords with a capacity of
16 Amps (U.K. 13 Amps)