Preface
Thank you for purchasing the new voltage detector. In order to use
this product safely and correctly, please read this manual thoroughly,
especially the Warning part.
After reading this manual, it is recommended to keep the manual at
an easily accessible place, preferably close to the device, for future
reference.
Overview
The KN 8065 series products are non-contact voltage detectors with
built-in flashlight and acousto-optic synchronous alarm function.
The CAT IV 1000V safety class ensures users’ safety, making them
essential tools for industry and home.
Low voltage mode (24V AC ~ 1000V AC)
(KN 8065-E only):
Suitable for testing low-voltage motor (< 90V), audio systems,
arc welding machines, underground mine lighting, cables with thick
insulation layer, and other weak electromagnetic AC signals.
High voltage mode (90V AC ~ 1000V AC):
For detecting urban electric supply and three-phase systems.
For example, power distribution units, electrical panels,
electrical appliances.
1. Please carefully read and fully understand the warnings and
operating instructions before use. If the equipment is used in
a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
2. Please test the detector on a known live source within the rated
AC voltage range before use.
3. If the detector appears damaged or is not working properly, stop
using it immediately.
4. Do not detect voltage higher than 1000V.
5. Use caution when working with voltages above AC 30Vr.m.s,
42V peak or DC 60V. Such voltages pose a shock hazard.
Clean the tester casing with a damp cloth and mild detergent.
Do not use abrasives or solvents!
6. There may still be voltage even when no acousto-optic alarm is on.
7. The insulation type, wire thickness, distance from voltage source,
shielded wire, other wires, socket design, and other factors may
adversely affect test result. If there are uncertainties, use other
methods to verify the voltage.
8. Do not assume neutral or ground wire is safe to touch. Incorrect
or poorly connected circuits may cause wires to be charged.
9. When low battery indication appears, please replace the batteries.
WARNING
Voltage
tester
24V - 1000V
Lápiz detector de voltaje
KN 8065-E
Voltage
tester
90V - 1000V
Lápiz detector de voltaje
KN 8065-S
ENGLISH
