4
Knorr-Bremse Group
PD-203-380
Doc. No. Y250909 (EN - Rev. 000)
July 2016
The information contained herein is subject to alteration without notice and therefore may not be the latest release. Please check our website www.knorr-bremseCVS.com for the latest update or contact your local Knorr-Bremse representative.
The figurative mark “K” and the trademarks KNORR and KNORR-BREMSE are registered in the name of Knorr-Bremse AG. Additional terms and conditions apply; please refer to our website knorr-bremseCVS.com for full Disclaimer.
Note: If service work is carried out on a vehicle based on information provided herein, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full
functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.
Copyright © Knorr-Bremse AG - all rights reserved, including industrial property rights applications. Knorr-Bremse AG retains any power of disposal, such as for copying and transferring.
Knorr-Bremse Systeme für Nutzfahrzeuge GmbH . Moosacher Straße 80 . 80809 Munich . Germany . Tel: +49 89 3547-0 . Fax: +49 89 3547-2767 . www.knorr-bremse.com . www.knorr-bremseCVS.com
P r o d u c t D a t a
Cables for KB4TA/KB4TA D
Pin Configurations
1
2
3
4
5
6
12
11
10
9
8
7
1
2
3
4
5
6
12
11
10
9
8
7
Modulator connectors
Deutsch Plug
Code ‘A’ (X1)
(Grey)
Deutsch Plug
Code ‘B’ (X2)
(Black)
5
6
7
2
1
3
4
5
6
7
2
1
3
4
24 V coding
Pin 1 red
Valve supply voltage
Pin 2 black
ECU supply voltage
Pin 3 yellow
ECU ground
Pin 4 brown
Valve ground
Pin 5 white
Warning lamp
Pin 6 white/green
CAN-Hi
Pin 7 white/brown
CAN-Lo
ISO 7638 Socket
(24 V)
ISO 7638 Plug
(24 V)
5
6
7
2
1
3
4
5
6
7
2
1
3
4
7-pin Bayonet Plug
(ISO 7638 Power)
7-pin Bayonet Socket
(ISO 7638 Power)
4.1
4.3
4.2
M24x1 Connector - Socket
6.1
6.2
6.3
DIN72585 Bayonet Socket
DIN72585 Bayonet Plug
4
3
2
1
4.1 - Common
4.2 - Release Valve
4.3 - Hold Valve
6.1 - Release Valve
6.2 - Common
6.3 - Hold Valve
1 - Release Valve
2 - Common
3 - Hold Valve
4 - not connected
DIN72585 Bayonet Socket
6.1 - Release Valve
6.2 - Common
6.3 - Hold Valve
DIN72585 Bayonet Plug
1 - Release Valve
2 - Common
3 - Hold Valve
4 - not connected
Y026787: 006: EN: Released: Fri Nov 11 11:18:50 CET 2016:
