background image

Manufacturers Declaration of Conformity 

For ML Accessories (Knightsbridge)

     Electrical products in accordance with CE marking

ML Accessories Ltd. Declare that all products have been designed, manufactured, and tested in 

accordance with the requirements of the relevant legislation

CE marking legislation

In Accordance with the following Directives:

2014/35/EU   

Low Voltage Directive

2014/30/EU   

EMC Directive

2014/53/EU   

Radio Equipment Directive

Including Legislation

1907/2006  

REACH

2015/863  

RoHS

2021/341  

ERP

Safety Standards

Full individual declarations and specific safety standards applicable to relevant product series can be found on 

our website

 

www.mlaccessories.co.uk

We hereby declare that the equipment named above has been designed to comply with the relevant 

sections of the above referenced specifications. The product complies with all essential requirements of 

the directives.

  

 

 

  

 

  

 

           

Scott Brewer 

Catherine Connolly

Technical Manager

 

CEO

ML Accessories Ltd. Unit E Chiltern Park, Boscombe Road, Dunstable. Bedfordshire, LU5 4LT

This declaration becomes invalid if technical or operational modifications are introduced without ML Accessories Ltd. written consent.

Содержание OP9R












Отзывы: