Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Completed
Conceal any power box cables using the clip leg
cable covers.
Ensure the worksurface is centered over the frame.
Pre-drill holes in the worksurface. Fully tighten all
10Gx20mm self tapping screws through each leg and
rail spacer bracket into the worksurface.
Step 5
Step 6
Team Table
4 Legs - 1800x800 & 2400x1200mm
Please Note:
Table top may have pre-drilled holes on the underside,
these holes may not align to your specific frame. If this is the case,
the frame will need to be aligned to the top and new holes drilled
separately and screws provided used.
