Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Step 2
Loosely connect the M8x20mm dome head bolt and
slot nut through the rail spacer bracket. Slide spacer
bracket onto rail, align to centre and tighten.
See
diagram below for number of spacer brackets and
placement based on rail measurement between legs.
Team Table
4 Legs - 1800x800 & 2400x1200mm
Step 3
Securely connect legs to rails lengths using the
M8x12mm dome head bolts.
To secure rails to
connectors place the rail onto the connector and
firmly tap the end of the rail with a rubber mallet.
Step 2
Securely connect legs to rails widths using the
M8x12mm dome head bolts.
To secure rails to
connectors place the rail onto the connector and
firmly tap the end of the rail with a rubber mallet.
Step 1
Slide the 2 way connectors over each leg, and securely
lock into place using M8x20mm cap head bolts.
Rail < 500mm = 0 Brackets
Rail > 500mm = 1 Brackets
Rail > 1600mm = 2 Brackets
