manualshive.com logo in svg

Knick PORTAVO 904X PH, Руководство пользователя

Поделиться
Скачать
Knick PORTAVO 904X PH Скачать руководство пользователя страница 39

39

Paraly SW 112 PC Software

The Paraly SW 112 PC software supplements the Portavo series. It allows convenient 
management of the data that have been acquired by the meters as well as simple 
and clear configuration of the meters. Paraly SW 112 starts automatically when the 
Portavo USB port is connected to the computer. 

The Paraly SW 112 PC software stands out by the following features:
•  Intuitive Windows user interface
•  Easy configuration and management of several meters
•  Display of device and sensor information
•  Configuration of individual buffer sets
•  Convenient management and evaluation of the data logger
•  Export function for Microsoft Excel
•  Print function
•  Upgrade/downgrade of device firmware

Note

: Prior to upgrading/downgrading the device firmware, Portavo is reset to its 

factory settings. 
Make the following backups prior to upgrading or downgrading:
•  Read out Portavo data logger.
•  Save the Portavo device configuration in Paraly.

The Paraly SW 112 PC software, incl. a detailed user manual, can be downloaded 
from www.knick.de.

Содержание PORTAVO 904X PH





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды