manualshive.com logo in svg

Knick PORTAVO 904X PH, Руководство пользователя

Поделиться
Скачать
Knick PORTAVO 904X PH Скачать руководство пользователя страница 37

37

Options 

Press the 

set

 key to access the configuration mode.

Use the arrow keys to select the “SETUP CODE” function and set an 
access code for configuration,  “CAL CODE” to set an access code for 
calibration, and/or “LOGGER CODE” to set an access code for the data 
logger.

set

SETUP CODE

Press the 

set

 key.

set

First digit blinks.

Set value.

set

Next digit blinks.

Set value.

set

...

Set value, press 

set

 to save the configuration 

access code.

When accessing the configuration menu, you will be prompted to enter an access 
code. 
If you want to set a code for access to calibration or the data logger, select “CAL 
CODE” or “LOGGER CODE” and proceed as described above.

Note: 

Functions are accessible to anyone with access code “0000”.

Important Note:

If you lose the SETUP access code, system access is locked. 
See the next page for more information.

Access Codes for CONF, CAL, and Data Logger

(with Option 001 SOP only) 

Options

Содержание PORTAVO 904X PH





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды