KNF NF 1.60, Инструкции по эксплуатации и монтажу

Страница: 6 / 20

Diaphragm-liquid pump NF 1.60 Technical data
KNF Flodos AG BA_NF1.60_EN_05_161566.docx
Translation of Original Operating and Installation Instructions
6
4. Technical data
Pump materials
The pump type KP stands for:
Assembly Material
1)
Pump head * PP
Valves EPDM
O-rings EPDM
Diaphragm EPDM
Resonating diaphragm PTFE
Tab. 2
1)
according to DIN ISO 1629 and 1043.1
The pump type KT stands for:
Assembly Material 1)
Pump head * PP
Valves FFKM
O-ring FFKM
Diaphragm PTFE-coated
Resonating diaphragm PTFE
Tab. 3 1) according to DIN ISO 1629 and 1043.1
* Pump head (Fig. 1) comprises an intermediate plate and a connecting
plate
Hydraulic ratings
Parameter 3) Value
Flow rate [l/min] 1), 2) 
0.65
Permissible pressure [bar g] 6
Suction head [mWG] 3
Max. inlet pressure [mWG] 3
Tab. 4
1)
Measured with water at 20°C / at atmospheric pressure
2)
Flow rates may vary from the values shown, depending on fluid
viscosity, pump head material and the hoses / hose connectors used.
3)
For special modifications outside the standard technical specifications
please contact a KNF pump specialist.
Hydraulic connections
Parameter Value
Hose connection NF ID / AD [mm] 4 - 6
Hose connection UNF ID / AD [Inch] 1/8“ - 1/4“
Tab. 5